Implementing Back-Side Illuminated Sensor (BSI) in High-Speed Applications
At speeds surpassing 1 million frames per second, high-speed imaging serves as an invaluable tool for research, capturing even the most fleeting occurrences in scientific and engineering domains. However, attaining such speed entails trade-offs. Most high-speed cameras are engineered to balance gigapixel-per-second (Gpx/sec) throughput against frame rate and resolution. For instance, a camera operating at 25 Gpx/sec achieves 25,700 frames per second (fps) with a resolution of 1280 x 800 pixels, while it can hit a higher frame rate of 28,500 fps at a reduced resolution of 1280 x 720. Despite different resolutions, both setups offer similar throughput. Extremely high frame rates, like 1 million fps, correspond to significantly smaller resolutions, posing challenges in visualizing subject matters.
As frame rates rise, the duration each pixel is exposed to light decreases. At 25,700 frames per second, each frame allows a maximum exposure of 39 microseconds (μs), while at 1 million frames per second, the maximum exposure time reduces dramatically to just 733 nanoseconds (ns). These brief exposure periods necessitate intense levels of illumination to compensate for the limited time the pixel receives light. Consequently, many high-speed applications suffer from insufficient light—a condition known as being "light-starved." This condition arises due to the extremely short exposure times at high frame rates, where the available illumination fails to provide adequate light to the camera's imaging sensor, resulting in less-than-ideal images and presenting practical challenges in certain applications.
How Does a BSI Sensor Work?
A Back-Side Illuminated (BSI) sensor is a type of image sensor used in digital cameras. It improves light sensitivity and reduces noise by changing the way the sensor is constructed.
In a traditional sensor, the wiring and circuitry are located on the same side as the light-sensitive pixels, which can block some light from reaching the pixels. In a BSI sensor, the wiring and circuitry are placed behind the light-sensitive pixels, allowing more light to reach the sensor. This results in better low-light performance and improved image quality.
Light Collection
BSI sensors improve light collection efficiency by moving the wiring and circuitry behind the light-sensitive pixels. This design allows more light to reach the pixels, especially in low-light conditions, resulting in brighter and clearer images.
Reduced Noise
By placing the wiring behind the pixels, BSI sensors reduce the interference caused by the wiring, leading to lower noise levels in the captured images. This results in cleaner and more detailed pictures, especially in high-ISO settings.
Improved Color Accuracy
BSI sensors can enhance color accuracy by improving the efficiency of light absorption in each pixel. This helps produce more vibrant and true-to-life colors in the final image, making them ideal for applications where color fidelity is crucial, such as photography and videography.
Advantages of BSI Sensor
The primary advantage of a Back-Side Illuminated (BSI) sensor lies in its ability to significantly enhance light sensitivity and reduce noise in captured images. By relocating the wiring and circuitry behind the light-sensitive pixels, BSI sensors allow more light to reach the sensor, particularly in low-light conditions. This results in brighter, clearer images with improved color accuracy and reduced noise levels, making BSI sensors ideal for situations where high image quality and sensitivity are paramount, such as in low-light photography, astrophotography, and high-speed imaging. Additionally, BSI sensors enable more compact device designs due to their thinner construction, offering a balance of performance and form factor that is advantageous in a wide range of imaging applications.
Improved Low-Light Performance
BSI sensors are more efficient at capturing light because they have a simpler path for light to reach the pixels. This results in better performance in low-light conditions, producing images with less noise and better detail.
Higher Sensitivity
BSI sensors can achieve higher sensitivity than front-illuminated sensors because they can collect more photons due to their design. This makes them ideal for applications where sensitivity is crucial, such as astrophotography or microscopy.
Better Signal-to-Noise Ratio
BSI sensors have a higher signal-to-noise ratio compared to front-illuminated sensors. This means that the images they produce have less noise, resulting in cleaner and more detailed pictures, especially in challenging lighting conditions.
High Speed & High Sensitivity 9k TDI Line Scan Camera with Charge-domain BSI Image Sensor
The latest VT-9K5X2-H550I-256 camera, utilizing a new Time Delayed Integration (TDI) line scan camera system paired with a Back-Side Illuminated (BSI) image sensor through charge-domain CMOS technology, offers superior line rates and heightened sensitivity compared to existing TDI line scan cameras.
Main Features
• 9k TDI, BSI(Back-Side Illuminated), Charge-domain CMOS
• CoaXPress Interface up to 543 kHz at 50 Gbps using 4 CH
• Bidirectional Operation with up to 256 TDI Stages in a Single Band, or 32 TDI Stages in a Dual Band
• Advanced DSNU and PRNU Correction
• Strobe Output Control
• GenICam Compatible - XML based Control
Unlike Front Side Illumination (FSI), the BSI variant significantly improves quantum efficiency in the near ultraviolet and visible spectra while elevating the signal-to-noise ratio, particularly beneficial for imaging in low-light scenarios.
Figure 1: The light receiving surface located at the top does not inhibit the way of light coming in, capturing more photon and allowing for higher sensitivity.
Equipped with Gpixel's cutting-edge BSI sensor, this camera captures 9k resolution images with a sensitivity boosted by 256 times. Moreover, it supports HDR functionality using both photosensitive bands, featuring 256 and 32 stages respectively.
With its combination of high speed and heightened sensitivity, this camera serves as an optimal choice for demanding applications such as semiconductor inspection, PCB (Printed Circuit Board) scrutiny, flat panel display assessment, and fluorescence imaging.
HDR Function
Figure 2: The cycling of two bands enables HDR (High Dynamic Range) Mode
Figure 3: By combining Band1 and Band2 images, users can detect objects that were not detectible before because the image was too dark or saturated.
UV, NIR Wavelength
Find out more on TDI Line Scan Cameras and how does TDI Line Scan Camera work
For further information on how TDI Line Scan Cameras with BSI sensor can address your specific application, please contact us.
Contact us to find out more on our products:
