Thermoelectric Cooled Cameras

Thermoelectric TEC Cooling Technology Cameras

Temperature is one of the most important factors of camera performance because the hotter sensor gets, the larger noises you will get. Therefore having a good heat flow camera structure is important to avoid the detriment of cameras' performance. Thermoelectric (TEC) cooling technology uses the Peltier effect to lower the temperature, reducing noises on extended exposure times.

* Thermoelectric Peltier Cooled – 20℃ below ambient temperature
* 71 Megapixel Resolution CMOS Imaging Sensor
* Camera Link Medium Interface up to 4.2 fps
* Minimizing the Number of Hot Pixels with TEC (up to 99%)
* Flat Field Correction
* Pixel Defect Correction
* Non-uniformity Correction (DSNU and PRNU
* Field Upgradable Firmware

* FPD, Electronics and Semiconductor Inspection
* Research and Scientific Imaging
* Machine Vision Inspection
* Document / Film Scanning


Vieworks’ TEC Cooling Camera

Vieworks provides the most powerful cooling cameras by designing special heat dissipation structure from internal components to the housing:

  • Maintaining the operating-sensor temperature steadily up to 20 degrees below the ambient temperature
  • Remove the moisture occurred from the cold-surface of the Peltier using Vieworks’ signature heating structure
  • Sturdy yet compact camera design

*The above images are intended to aid the consumers' understanding and may differ from actual images.


Specifications:

CXP

Model Resolution Frame Rate Mount Pixel Size (㎛ x ㎛)
VP-50MX-M/C 30 7920 × 6004 30 fps F-mount 4.6 × 4.6
VP-65MX-M/C 31 I 9344 × 7000 31 fps F-mount 3.2 × 3.2
VP-101MX-M/C 9 H 11648 × 8742 8.7 fps M72-mount 3.76 × 3.76
VP-151MX-M/C 6 H 14192 × 10640 6.2 fps M72-mount 3.76 × 3.76

camera_link

Model Resolution Frame Rate Mount Pixel Size (㎛ x ㎛)
VP-71MC-M/C 4 10000 × 7096 4.2 fps F-mount 3.1 × 3.1
VP-101MC-M/C 8 H 11648 × 8742 8.1 fps M72-mount 3.76 × 3.76
VP-151MC-M/C 5 H 14192× 10640 5.5 fps M72-mount 3.76 × 3.76